With a human-rated Launch Vehicle Mark (LVM) to be used for the upcoming Gaganyaan mission, the LVM-3’s successful launch of the Chandrayaan-3 on July 14 gained significance, as it has further enhanced the reliability of the launch vehicle.
Following the launch, LVM project director Mohan Kumar said that the rocket used for the Chandrayaan-3 mission used multiple systems that were rated for humans. “The human-rated S200 [solid strap-on motors] that were used earlier were again used, and the L110 Vikas engine has also completely become human-rated today,” he said.
ISRO’s Gaganyaan project is expected to demonstrate India’s human spaceflight capability by launching three astronauts to an orbit of 400 km for a three-day mission, and then bringing them safely back to earth, landing them in Indian seas.
Wide contribution
The success of the Chandrayaan-3 launch was celebrated by several public and private sector units all over the country that played an active role in the mission.
For instance, Mishra Dhatu Nigam Limited (MIDHANI), the defence PSU, had developed and supplied various critical and strategic materials for the three-stage heavy lift launch vehicle.
It supplied cobalt base alloys, nickel base alloys, titanium alloys and special steels for liquid engines, nozzles for liquid stages, gas bottles, thrusters, cryogenic upper stage components, rocket motor casing, propellant tanks and investment castings of nickel alloys, stainless steel for exhaust unit, etc., said an official release.
Anatomy of the Chandrayaan-3 mission including modules, objectives and phases of the mission. Text by Hemanth C.S., Graphics by Sebastian Francis. | Photo Credit: Source: ISRO
Kerala government undertaking Keltron in Thiruvananthapuram, Kerala Minerals and Metals (KMML) in Kollam, and long-time industry partners of the Indian Space Research Organisation (ISRO) such as Ananth Technologies Ltd (ATL) and Kortas Industries Pvt Ltd supplied many components. Keltron supplied 41 electronics modules and various power modules. Many of the critical components of the mission used alloys from titanium sponges produced by the KKML. KMML has a 500-tonne capacity titanium sponge plant at Chavara, Kollam, a joint venture with the Vikram Sarabhai Space Centre (VSSC) and the Defence Metallurgical Research Laboratory (DMRL).
A Kerala-based rubber products firm supplied the crucial flex seal. Vajra Rubber Products in Thrissur supplied S-200 thrust vector control flex seal for the vehicle.
The Hyderabad-headquartered Ananth Technologies Ltd (ATL), which has exclusive facilities in Thiruvananthapuram and Bengaluru for supporting ISRO’s space programmes, contributed to the avionics packages for the LVM3 mission, including onboard computers on the launch vehicle, navigation system, control electronics, telemetry, power systems and various vehicle interface units.
Also Read Chandrayaan-3 lunar mission | ISRO’s next leap to the Moon
In Bhubaneswar, technicians and students of the Central Tool Room and Training Centre are eagerly waiting to see the successful soft landing of the vehicle on the moon’s surface. The CTTC has also supplied critical components. The Bhubaneswar-based central PSU has manufactured several flow control valves used in the LVM-3. It also supplied gyroscopes, propellant walls and parts, and sensors. The CTTC also manufactured some links and components of the wheel mechanism of the moon lander.
- Following Chandrayaan’s launch, LVM project director Mohan Kumar said that the rocket used for the Chandrayaan-3 mission used multiple systems that were rated for humans.
- ISRO’s Gaganyaan project is expected to demonstrate India’s human spaceflight capability by launching three astronauts to an orbit of 400 km for a three-day mission, and then bringing them safely back to earth, landing them in Indian seas.
- The success of the Chandrayaan-3 launch was celebrated by several public and private sector units all over the country that played an active role in the mission.
(With inputs from Kerala, Telangana and Karnataka bureaus and PTI)
Published - July 14, 2023 09:16 pm IST
