Railway Board was aware of short-cut methods by signalling staff 

Top officials were warned of the issue after five incidents 

June 14, 2023 09:28 pm | Updated June 15, 2023 09:33 am IST - CHENNAI

Representative image.

Representative image. | Photo Credit: Reuters

Two months before the devastating train accident in Odisha that claimed the lives of 288 passengers and left over 900 others injured, the Railway Board had flagged the issue of signalling staff resorting to short-cut methods and warned top Railway officials of the alarming situation. 

Referring to five incidents where trains entered the wrong path due to short-cut methods adopted by the signalling staff, the Railway Board in a letter to General Managers of Zonal Railways expressed “serious concern” that despite repeated instructions the ground situation was not improving and “signalling staff are continuing to adopt short-cut methods for clearing signals without checking correspondence from site and without proper exchange of disconnection/reconnection memo, with operating staff.”

The five incidents, including two derailments, occurred in January-March, 2023. On January 27, 2023, Northern Railway Train No 22454 Meerut City-Lucknow Rajya Rani Express cleared for arrival at Lucknow station entered the washing line area after cables cut by construction staff were reconnected without testing. 

In another incident in Kharkopar in Central Railway zone, a train cleared for arrival on Platform No. 1 derailed after wrong wiring was done in the relay room by the signalling staff. The three other incidents were reported in Northern Railway, South Western Railway and West Central Railway zones.

Also Read | Increase in train accidents worries Indian Railways

“This is alarming and an issue of serious concern. The signalling gears were reconnected by Signal & Telecommunication staff without proper testing of points after blocks for switch/turnout replacement, wrong wiring during preparatory works, attending signal failures etc., Such practices reflect dilution of manual and codal provisions. Same are potential hazards to safety in train operations and need to be stopped,” R.N. Sunkar, Member (Infrastructure), Railway Board, said in the letter.

Reiterating that signal gears should be reconnected only after proper testing to ensure safety of the signalling system, he urged senior Railway officials to review the safety aspects at weekly meetings at the divisional and headquarter levels. 

Also Read |Balasore tragedy | Data reveals decline in train accidents, but Indian Railways’ safety expenses remain low

At a time when a large number of infrastructure works were under progress with stringent targets requiring involvement of open line staff at every stage, Railway officials in the field had to be sensitised “to ensure integrity of the signalling system being of utmost importance from the safety point of view”, the letter said.

0 / 0
Sign in to unlock member-only benefits!
  • Access 10 free stories every month
  • Save stories to read later
  • Access to comment on every story
  • Sign-up/manage your newsletter subscriptions with a single click
  • Get notified by email for early access to discounts & offers on our products
Sign in

Comments

Comments have to be in English, and in full sentences. They cannot be abusive or personal. Please abide by our community guidelines for posting your comments.

We have migrated to a new commenting platform. If you are already a registered user of The Hindu and logged in, you may continue to engage with our articles. If you do not have an account please register and login to post comments. Users can access their older comments by logging into their accounts on Vuukle.