India beats Australia to seal a series win

The triumph is a remarkable turnaround for the Indians, who suffered a humiliating 1-4 debacle in the preceding ODI series.

January 29, 2016 02:01 pm | Updated November 17, 2021 03:06 am IST - Melbourne

India leave the field after their victory against Australia during their T20 cricket match at the Melbourne Cricket Ground January 29, 2016. REUTERS/Hamish Blair

India leave the field after their victory against Australia during their T20 cricket match at the Melbourne Cricket Ground January 29, 2016. REUTERS/Hamish Blair

India recorded their first ever bilateral series triumph on Australian soil, as they clinched the Twenty20 rubber by taking an unassailable 2-0 lead with a comprehensive 27-run victory in the second match, riding on an all-round show here today.

Put in to bat, India relied on brilliant innings by Rohit Sharma (60) and Virat Kohli (59), along with a useful 42 by opener Shikhar Dhawan, to post a formidable 184/3.

Defending the target, the Indian bowlers put up a fine collective effort to rip through Australia’s middle order and restrict the hosts to 157/8 in 20 overs.

The Indians thus > took a 2-0 lead in the three-match series , which ends on Sunday in Sydney. This was India’s first ever bilateral series win Down Under. The Indians had earlier won a tri-series in 2007-08 and the Benson and Hedges World Championship in 1985.

The triumph is a remarkable turnaround for the Indians, who suffered a humiliating >1-4 debacle in the preceding ODI series .

In today’s match as well, it was a turnaround of sorts by the bowlers, who withstood the early onslaught to make good recovery.

Chasing 185, Australia got off to a rolling start as Shaun Marsh (23) paired up with skipper Aaron Finch (74 runs, 48 balls, 8 fours, 2 sixes) at the top.

India opened with Ashish Nehra (0-34) and Jasprit Bumrah (2-37), but instead of rotating the bowlers at the beginning like in Adelaide, the two were persisted with for the first six overs.

And they bled runs as the 50-mark came up for Australia in just 31 balls. Mahendra Singh Dhoni missed a regulation stumping of Marsh, while at the other end Finch completed his 6th T20I fifty off just 27 balls, bringing it up with a six off R Ashwin (1-27).

Thereafter, Finch survived thrice, enjoying dropped catches in two overs, one each by Umesh Yadav, Rishi Dhawan and Shikhar Dhawan, in the ninth and 10th overs respectively.

The bowlers continued to suffer and the only bright spark was when Hardik Pandya finally caught Marsh at long on.

It was also perhaps the turning point. The all-rounder removed Chris Lynn (2) in the next over, caught behind. Yuvraj Singh (1—7) had Glenn Maxwell (1) stumped in the 12th over.

While the 100—mark came up for Australia, Shane Watson (15) looked like staying at the wicket and giving support to Finch, who continued hitting big as he was suffering from a hamstring problem.

And the match swung in India’s favour finally when Finch was run out off a superb throw from Jadeja again at extra cover, finding the Australian skipper just short as Dhoni disturbed the bails.

The 150-mark came up in the 19th over, but the hosts finished well short of the target once again.

Earlier, Sharma (60 runs, 47 balls, 5 fours, 2 sixes) and Kohli (59 not out, 33 balls, 7 fours, 1 six) struck quick-fire half-centuries, as India eased to 184/3.

This was after Australia won the toss and elected to field first. The hosts made six changes to their line—up in a bid to test bench strength as also filling up for a few players who have already left to prepare for the New Zealand tour.

Rohit and Shikhar Dhawan (42 runs, 32 balls, 3 fours, 2 sixes) got off to a slow start, with Shane Watson (0—17) and Andrew Tye (1—28) opening proceedings for Australia.

Despite the slow start, they brought up the 50—mark in the sixth over, adding 50 runs in the next four overs. They continued to push on and India closed up on the 100—mark in the 11th over itself, when Dhawan was caught trying to reverse—sweep Glenn Maxwell (1-17).

It didn’t stop Rohit though and he brought up his eighth T20I fifty off 37 balls in the next over.

At the other end, Kohli started off from where he had left in Adelaide, up and running in no time. He took the onus of scoring on himself, and hit John Hastings (0-35) for three boundaries in the 13th over, the bowler suffering throughout the innings.

The duo put up 46 runs for the second wicket in no time, scoring at 9-plus per over during the five overs they batted together.

But against the run of play, Rohit was run-out in the 16th over, as Kohli refused a second run after hitting the ball to the deep. India were placed at 143/2 at the end of the 16th over then, as skipper MS Dhoni (14) walked in to provide the final flourish.

The two batsmen upped the ante further as the run-rate didn’t come down below the 9-per-over mark, adding 38 runs off just 22 balls, pushing the score past the par—score on a relatively slower wicket than Adelaide.

In the meantime, Kohli completed his 11th T20I fifty off only 29 balls, in the 20th over, his second successive fifty of the series and his sixth 50—plus score in seven innings on this tour.

Ten runs came off the last over, and 41 off the last four, while India coasted to a big finish. Suresh Raina (0 not out) was the unbeaten batsman, while Scott Boland (0-30), James Faulkner (0-35) and Nathan Lyon (0—15) were the other bowlers used.

0 / 0
Sign in to unlock member-only benefits!
  • Access 10 free stories every month
  • Save stories to read later
  • Access to comment on every story
  • Sign-up/manage your newsletter subscriptions with a single click
  • Get notified by email for early access to discounts & offers on our products
Sign in

Comments

Comments have to be in English, and in full sentences. They cannot be abusive or personal. Please abide by our community guidelines for posting your comments.

We have migrated to a new commenting platform. If you are already a registered user of The Hindu and logged in, you may continue to engage with our articles. If you do not have an account please register and login to post comments. Users can access their older comments by logging into their accounts on Vuukle.