What is a telescope? How good are modern telescopes? | Explained

It’s a common misconception that telescopes are designed to make astronomical objects appear larger

Updated - September 18, 2024 09:14 am IST

An artist’s impression of the Extremely Large Telescope (2009), currently under construction in Chile.

An artist’s impression of the Extremely Large Telescope (2009), currently under construction in Chile. | Photo Credit: Swinburne Astronomy Productions/ESO

The modern telescope is a window into the universe, a sophisticated paintbrush in the hands of skilled astronomers that brings the fantastical wonders of the cosmos into view. And in so doing, telescopes give us an incomparable sense of our place and remind us of the joy of curiosity and exploration.

Two types of telescopes

Celestial objects emit light in all directions. But only light rays travelling in the direction of the earth will reach us. And when these rays reach us after a lengthy journey, they are virtually parallel.

There are two ways to concentrate these rays and create an image. We can use a concave mirror to focus incoming photons at the focus point. The image produced by this reflecting telescope is real, inverted, and smaller. Most contemporary telescopes are such reflecting telescopes. Giant telescopes use parabolic mirrors because light rays reflected from the concave produce several focal points, causing the image to blur.

In a reflecting telescope, rays reflected by the primary mirror are diverted to a secondary mirror, which reflects them into an eyepiece with a small lens to enhance the image. Alternatively, a hole is drilled in the primary mirror’s centre, and the rays the primary reflects pass through this hole to the secondary, which finally reflects them upward into the eyepiece.

A diagram showing the path of light through a Newtonian reflecting telescope.

A diagram showing the path of light through a Newtonian reflecting telescope. | Photo Credit: Krishnavedala/Wikimedia Commons

Some telescopes also use lenses to bend light and directly create an image instead of using lenses. This is a refracting telescope. To observe fainter cosmic objects, much bigger lenses are required, which will slump under their own weight and distort the image. The maximum practicable lens size in a refracting telescope is around 1 m. The world’s largest refracting telescope is at Yerkes Observatory in the U.S., with a 1.02-m lens.

While reflecting telescopes have replaced many refracting ones, these instruments still use lenses, and their ability to refract light, for other purposes. For example, the telescope at the Vera C. Rubin Observatory uses three lenses to help sharpen images. One of these, shown here, is among the largest of its kind in the world with a diameter of 1.55 m.

While reflecting telescopes have replaced many refracting ones, these instruments still use lenses, and their ability to refract light, for other purposes. For example, the telescope at the Vera C. Rubin Observatory uses three lenses to help sharpen images. One of these, shown here, is among the largest of its kind in the world with a diameter of 1.55 m. | Photo Credit: LSST

The primary function of telescopes

It’s a common misconception that telescopes are designed to make astronomical objects appear larger. Instead their primary function is to enhance the brightness of celestial objects, measured by their light-gathering power.

Say it’s drizzling and you wish to collect rainwater. Place a cup with a small opening and a tub with a larger opening outside. Due to the larger opening, the tub will collect more water than the cup in a given time.

This is what telescopes do with light.

Views of an Asian male human eye, taken consecutively in well lit (left) and dim (right) environments to show the changes in pupil size. The pupil measured 3mm on the left and 9mm on the right.

Views of an Asian male human eye, taken consecutively in well lit (left) and dim (right) environments to show the changes in pupil size. The pupil measured 3mm on the left and 9mm on the right. | Photo Credit: Rapidreflex/Wikimedia Commons

Let’s expand the analogy to include the human eye. The opening size that regulates how much light may pass through an optical device is called the aperture. When the eye’s pupil is fully dilated, its aperture area is around 153.9 sq. mm.

To compare, a 0.07-m reflecting telescope — available as a toy — has an aperture area of 18241.4 sq. mm. This is 118.5-times more light-collecting area than the human eye.

Various apertures for a Nikon AF Nikkor lens with focal length 50 mm. Changing the aperture by one stop changes the aperture area by a factor of two, i.e. the area at f/1.4 is twice as big as the area at f/2.0. Each step is specified by the diameter of the aperture as a fraction of the focal length. At f/1.4 the aperture has a diameter of 50 mm/1.4 = 35.7 mm.

Various apertures for a Nikon AF Nikkor lens with focal length 50 mm. Changing the aperture by one stop changes the aperture area by a factor of two, i.e. the area at f/1.4 is twice as big as the area at f/2.0. Each step is specified by the diameter of the aperture as a fraction of the focal length. At f/1.4 the aperture has a diameter of 50 mm/1.4 = 35.7 mm. | Photo Credit: KoeppiK/Wikimedia Commons

Features of telescopes

The brightness of celestial objects is quantified by their apparent magnitude. Its values are logarithmic, meaning each step represents 2.512-times more brightness than the earlier. For example, a star of magnitude 4.0 is 2.512-times brighter than a star of magnitude 5.0.

The lower the apparent magnitude, the brighter the object; the larger the magnitude, the dimmer it is. The sun’s apparent magnitude on this scale is –26.78, Venus’s is –4.92, and Sirius, the brightest star in the night sky, is –1.46.

The Andromeda Galaxy, which has trillions of stars and an apparent magnitude of +3.44, is the furthest object we can see with our eyes. It appears as a fuzzy patch and we can’t discern individual stars. The star V762 Cassiopeiae is 1,000,000-times brighter than the Sun. But because it is 16,000 lightyears away, it has an apparent magnitude of only +5.82. It’s the faintest star visible to the naked eye.

The Andromeda Galaxy (Messier 31) seen through a telescope and enhanced to highlight certain features. The small Messier 32 galaxy is seen above and slightly to the left (directly south) of the centre of M31, and Messier 110 is below and to the left.

The Andromeda Galaxy (Messier 31) seen through a telescope and enhanced to highlight certain features. The small Messier 32 galaxy is seen above and slightly to the left (directly south) of the centre of M31, and Messier 110 is below and to the left. | Photo Credit: David Dayag/Wikimedia Commons

The limiting magnitude is the brightness of the faintest object visible to an optical instrument. Anything fainter will be lost to this instrument. The human eye’s limiting magnitude in ideal conditions is +6.5 while that of the toy telescope is +11.2. In other words, this telescope will reveal objects 100-times fainter than what a human eye can perceive.

Resolution is another essential feature. Simply put, a telescope’s resolution limit specifies the size of the smallest detail it can spot between two objects that are really close together. The greater the resolving capacity, the more details will be visible. The human eye with 20/20 vision has a resolving power of 60 arcsec. One arcsec is 1/3600th of a degree. The toy telescope’s optimal resolving power is around 1.47 arcsec, over 40-times greater.

Why are telescopes setup on mountains?

The earth’s tumultuous atmosphere interferes with the telescope’s functioning. When starlight passes through the turbulence of air, it twinkles. Even the largest telescopes have a resolution of just 0.3-0.5 arcsec. The higher we go, the less the air is disturbed, which is why most telescopes are erected atop mountains.

Space telescopes are more than 400 km above sea level, allowing them to entirely escape atmospheric disturbances. That is why the Hubble Space Telescope has a resolving power of around 0.04 arcsec, 10-times greater than the best ground-based telescopes.

In recent years, scientists have developed a method to increase the telescope’s resolution by correcting for the effects of air turbulence. They use a laser to make an artificial star in the upper atmosphere and then analyse how the guiding star fluctuates. Using this information, the deformable mirror is flexed to correct for distortions.

A more enhanced version of this technology, called tomography, examines segments of the air column and eliminates aberrations to provide a crystal clear image. 

Limits to telescopes

A telescope with a higher limiting magnitude is required to look deep into the universe, which demands a larger primary mirror. However, there is a limit to the size of the primary mirror.

Grab a sheet of newspaper. Hold it only at the edges and try to keep it horizontal. Because of its weight, the sheet will sag and droop. Now reduce the size of the sheet. If the sheet is large enough, it will still droop, but when it’s small enough, it will be easy for you to hold it flat. Similarly, a mirror wider than around 8.5 m will sink under its own weight, distorting its surface.

Astronomers have found a workaround. Instead of a single primary mirror, today’s large telescopes have many segments. Each piece is small enough to remain firm without slumping. And when they are combined, the overall light-collecting area is still large.

A comparison of the primary mirrors of the Hubble Space Telescope and the James Webb Space Telescope with a person for scale.

A comparison of the primary mirrors of the Hubble Space Telescope and the James Webb Space Telescope with a person for scale. | Photo Credit: Bobarino/Wikimedia Commons

Advanced telescopes around the world

The largest telescope to date is the Large Binocular Telescope (LBT), which has two 8.4-m-wide mirrors and an effective combined aperture of 11.9 m. It is located at the Mount Graham International Observatory in Arizona, USA.

The Extremely Large Telescope (ELT) is under construction atop the Cerro Armazones in the Atacama Desert in Chile, as part of the European Southern Observatory. It has five mirrors and a combined aperture of 39.3 m. It is expected to be completed by 2028. The ELT’s light-gathering power will exceed that of any telescope to date, with a fantastic resolving power. Our eyes can discern two lights burning 30 cm apart and kept 1 km away. In perfect conditions, the ELT can distinguish two lights kept 30 cm apart from 12,000 km away.

A diagram showing the five-mirror optical system of the under-construction Extremely Large Telescope, as of January 18, 2017.

A diagram showing the five-mirror optical system of the under-construction Extremely Large Telescope, as of January 18, 2017. | Photo Credit: ESO

Astronomers also increase the exposure time to better observe distant cosmic objects. Even a cup left in a drizzle for an extended duration will become full with rainwater. Similarly, by keeping the camera’s shutter mounted to the telescope open for a protracted period, we may record dimmer light sources. Telescopes expose instruments called charge-coupled devices to light from target sources for many hours before combining them to generate a composite image.

The Subaru Telescope is an 8.2-m-wide Japanese telescope located at the Mauna Kea Observatory in Hawaii. It recently used 10 hours of exposure time to capture a faint celestial object with a visual magnitude of 27.7, which is 100-million-times fainter than what any human eye can detect.

T.V. Venkateswaran is a science communicator and visiting faculty member at the Indian Institute of Science Education and Research, Mohali.

0 / 0
Sign in to unlock member-only benefits!
  • Access 10 free stories every month
  • Save stories to read later
  • Access to comment on every story
  • Sign-up/manage your newsletter subscriptions with a single click
  • Get notified by email for early access to discounts & offers on our products
Sign in

Comments

Comments have to be in English, and in full sentences. They cannot be abusive or personal. Please abide by our community guidelines for posting your comments.

We have migrated to a new commenting platform. If you are already a registered user of The Hindu and logged in, you may continue to engage with our articles. If you do not have an account please register and login to post comments. Users can access their older comments by logging into their accounts on Vuukle.