The A-Z of e-waste management

A look at India’s e-waste regulations and what you can do to manage your e-waste

June 18, 2018 04:32 pm | Updated June 19, 2018 01:28 pm IST

Waste management, especially when it comes to plastic, has been given much attention over the years in the country. Plastics took centre stage in the country’s discourse on environmental conservation this World Environment Day. Still, somehow, the issue of e-waste, which is among the most dangerous kinds of waste — for it contains heavy metals and other toxic chemicals — remains insidious.

Even today, when India is among the world’s largest consumer of mobile phones with 1.5 million tonnes of e-waste generated in 2015, most consumers are still unaware of how to dispose of their e-waste. Most Indians end up selling their e-waste to the informal sector, which poses severe threats to human (including children’s) lives, with its improper and highly hazardous methods of extracting the trace amounts of precious metal from it and handling e-waste for profit.

The government passed the first law on e-waste management in 2011, based on Extended Producer Responsibility (EPR), which put the onus on the producer for the management of the final stages of the life of its product, in an eco-friendly way, by creating certain norms in tandem with state pollution control boards. However, it did not set collection targets; this was amended in the new law, passed two years ago. What is the impact?

Sandip Chatterjee, author of the paper ‘Electronic Waste and India’; Director, Ministry of Electronics and Information Technology; and the nodal officer in the Ministry for developing Recycling technologies of Electronic Waste management, shares his personal views.

How have the new laws on e-waste management in India been effective?

E-waste (Management) Rules, 2016, enacted since October 1, 2017, had further strengthened the existing rules. Over 21 products (Schedule-I) were included under the purview of the rule. The rule also extended its purview to components or consumables or parts or spares of Electrical and Electronic Equipment (EEE), along with their products.

The present rule has strengthened the Extended Producer Responsibility (EPR), which is the global best practice to ensure the take-back of the end-of-life products. A new arrangement entitled, ‘Producer Responsibility Organisation’ (PRO) has been introduced to strengthen EPR further. PRO, a professional organisation, would be authorised or financed collectively or individually by producers, to share the responsibility for collection and channelisation of e-waste generated from the ‘end-of-life’ products to ensure environmentally sound management of such e-waste.

The rule has provisioned the target for the producers, which was missing in the first version of the Rule (2012). Now, manufacturers are mandated to take back their sold products with recommended mechanisms.

The present Rule ensures that every producer of electrical and electronic equipment (EEE) and their components or consumables or parts or spares shall ensure that new EEE and their components or consumables or parts or spares do not contain pollutants such as lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers beyond a maximum concentration value. Every producer shall provide detailed information on the constituents of the equipment and their components or consumables or parts or spares, along with a declaration of conformance to the RoHS (Restriction of Hazardous Substances) provisions in the product user documentation. Imports or placement in the market for new electrical and electronic equipment shall be permitted only for those which are compliant to provisions of (sub-rule (1) and sub rule (4)) rule 16.

Further, Central Pollution Control Board (CPCB) shall conduct random sampling of electrical and electronic equipment placed on the market to monitor and verify the compliance of RoHS provisions and the cost for sample and testing shall be borne by the producer. The random sampling shall be as per the guidelines of CPCB. If the product does not comply with RoHS provisions, the producers shall take corrective measures to bring the product into compliance, and withdraw or recall the product from the market, within a reasonable period as per the guidelines of CPCB.

What would you suggest as a step-by-step guide for a citizen who wants to dispose of his electronic gadget (phone/TV/laptop/anything else) in the right way?

Effective awareness would be the right step for all stakeholders. As per the rule, manufacturers have been mandated to create awareness in the country.

The Ministry of Electronics and Information Technology, MeitY, has initiated an E-waste Awareness programme under Digital India initiatives, along with industry associations from 2015, to create awareness among the public about the hazards of e-waste recycling by the unorganised sector, and to educate them about alternate methods of disposing of their e-waste.

The programme stresses the need for adopting environmentally friendly e-waste recycling practices. The general public is also encouraged to participate in ‘Swachh Digital Bharat’, by giving their e-waste to authorised recyclers only.

The programme has adopted the best practices for e-waste recycling available globally, so that this sector could generate jobs as well as viable business prospects for locals. In the initial phase of the programme, a city each in the 10 identified states (namely Madhya Pradesh, Uttar Pradesh, Jharkhand, Orissa, Goa, Bihar, Pondicherry, West Bengal, Assam and Manipur) are being covered. The stakeholders involved are schools, colleges, Residents’ Welfare Associations (RWAs), bulk consumers, regulatory bodies, and the media.

So far, a total of 1,23,087 participants from schools, colleges, RWAs, manufacturers, refurbishers, informal operators to 2273 government officials have participated in various cities. A dedicated website (www.greene.gov.in), Twitter handle and Facebook page have been created in order to spread awareness through social media. Besides, ‘E-Waste Mass Awareness Campaign through Cinema’ has also been initiated for awareness amongst the youth. An audience of nearly 7.6 crores has been covered in around 815 theatres. The second phase has been initiated, with 20 more states, including Andhra Pradesh, Andaman and Nicobar Islands, Chhattisgarh, Daman and Diu, Delhi, Gujarat, Haryana, Himachal Pradesh, Karnataka, Kerala, Lakshadweep, Maharashtra, Meghalaya, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura and Uttarakhand.

Has the law forcing manufacturers to accept end-of-life products had any impact?

In the initial phase, it is, apparently, non-effective. However, over the years, all the MNCs would abide by the law and the EPR target to avoid litigation and to save their international reputation. EPR implementation would take care of the further course. PROs are also created to handhold the manufacturers to implement EPR effectively.

Could you highlight the importance of e-waste management in India?

E-waste is growing at a compound annual growth rate (CAGR) of about 30% in the country. Assocham estimated that e-waste generation was 1.8 million metric tonnes (MT) per annum in 2016 and would reach 5.2 million metric tonnes per annum by 2020. Unless we have effective implementation of the rule, the country would end up creating many such informal processing hubs such as those in Moradabad and Seelampur, where soil, water and air are polluted to a beyond-repairable level. Strict implementation of the rule, creating adequate awareness, training for requisite skill sets and providing affordable technology to the informal sector could be a game-changer. Upgradation of the informal sector to reach environmentally acceptable operations is presently missing, and is not part of the rule.

The Ministry of Electronics and Information Technology (MeitY) has developed affordable technologies to recycle valuable materials and plastics in an environmentally sound manner, including two exclusive PCB recycling technologies, viz 1000 kg/ day capacity (~35 MT e-waste) and 100kg/batch (~3.5MT e-waste) processes, with acceptable environmental norms. Unique methods, exclusively for processing circuit boards, have been developed. The processes have been scaled up and established for demonstration. The process is cost-effective and suitable for a developing country like India.

E-waste also contains plastic, up to nearly 25% of its weight. Novel recovery and conversion of e-waste plastics to value-added products have also been successfully developed. The developed process is capable of converting a majority (76%) of the waste plastics into suitable materials, which could be used for virgin plastic products. The technology has already been transferred for commercialisation. The 1000kg PCB/day continuous process plant would be suitable for creating an eco-park in the country, whereas, the 100kg PCB/batch process plant would be suitable for the informal sector. This could be done by upgrading and transforming the present state of affairs of informal sectors to semi-formal units, with acceptable environmentally robust operations. This transformation would definitely attract more informal units to upgrade their operations for healthy, hygienic, legally acceptable livelihoods. The regulator would also then be empowered to implement the rule more stringently and close down the remaining illegal informal operations. This revolution in the country would be able to concentrate feedstock at some designated places, presently scattered across various informal sectors, which are actually demotivating the state-of-the-art recycling industry to set up their units in the country.

There are nearly 50 such recyclers in Karnataka alone, according to Archana Tripathi, programme director at Saahas, and nearly 30 in Bengaluru.

Tripathi is confident that gradually, producers will also set up conducive infrastructure for the collection of e-waste, in compliance with government regulations.

0 / 0
Sign in to unlock member-only benefits!
  • Access 10 free stories every month
  • Save stories to read later
  • Access to comment on every story
  • Sign-up/manage your newsletter subscriptions with a single click
  • Get notified by email for early access to discounts & offers on our products
Sign in

Comments

Comments have to be in English, and in full sentences. They cannot be abusive or personal. Please abide by our community guidelines for posting your comments.

We have migrated to a new commenting platform. If you are already a registered user of The Hindu and logged in, you may continue to engage with our articles. If you do not have an account please register and login to post comments. Users can access their older comments by logging into their accounts on Vuukle.